Background

Lanyards

Fall Protection

  • The Energy Absorber consists of a special white inner polyamide core which absorbs the arresting forces in the event of a fall. The coloured webbing serves as a back up. The clear protective covering helps in easy and fast visual inspection.

    How Does The Energy Absorber Work

    Shock/Energy Absorbers are designed to be incorporated in Personal Fall Arrest or Travel Restraint System. The unique design of tear webbing (used in Energy Absorber) has the ability to withstand high impact pressure thus preventing serious injury during a fall. Tear webbing of Shock/ Energy Absorber is designed differently & generally involves using two strips (or halves) of webbing that are then woven together again a second time to form a single piece of webbing, but with two end 'ears. The 'ears' are then sewn together with a piece of regular webbing in a ircula loop, which is designed to be a 'back-up' strap.

    During a fall from height, the shock (Kinetic Energy) is to be absorbed in a controlled manner. The fall is not stopped abruptly thus minimising injury with gradual deceleration taking place as the progressive tearing of the webbing irreversibly absorbs the Kinetic Energy of the fall. The purpose of Shock/ Energy Absorbers is to absorb energy that is created as the body falls towards the ground under that gravity. The 'shock' of the fall is reduced with an energy-dissipating system that starts to take up energY applied to it over 200 kg of fal force. Under the European Standard EN 355:2002, this must not allow the body to receive a force exceeding 6 kN.

    Key Features Of Shock/energy Absorbers:

    Maximum energy absorption due to unique design

    Made of High tenacity yarns used

    High strength factors

    Norebound effect

    Minimized injury due to reduced acceleration

    Adherence to fall protection standards
  • K-EA-300

    Energy Absorber K-EA-300 is made up of 44mm wide Polyamide Tear Webbing which is purposely designed to reduce the impact offall force to less than 6kN in case of a fall from height.

    CE Certified; Conforms to EN 355:2002
  • K-EA-400

    Energy Absorber K-EA-400 is made up of 30mm wide Polyamide Tear Webbing which is purposely designed to reduce the impact of fall force to less than 6kN in case of a fall from height.

    CE Certified; Conforms to EN 355:2002
  • K-FBRL-341*

    Made of Polyamide Braided Rope (Dia 12mm)

    Length of 1.5 m, 1.8 m, 2.0 m

    Equipped with:

    • 1 Karabiner K-SSK112
    • 1Energy Absorber K-EA-300
    • 2 Scaffold Hooks K-131

    Conforms to EN 355:2002
  • K-FBRL-351*

    Made of 3 strands 12mm dia Twisted polyester Rope

    Length of 1.5 m, 1.8 m, 2.0 m

    Equipped with:

    • 1 Karabiner K-SSK112
    • 1 Energy Absorber K-EA-300
    • 2 Scaffold Hooks K-131

    Conforms to EN 355:2002
  • K-FBRL-352

    Made of 3 strands 12mm dia Twisted polyester Rope

    Length of 1.5 m, 1.8 m, 2.0 m

    Equipped with:

    • 1 Karabiner K-SSK112
    • 1 Energy Absorber K-EA-300
    • 2 Scaffold Hooks K-121

    Conforms to EN 355:2002
  • K-WPL-241

    Made of 14mm dia polyester 3-strand Twisted Rope.

    Has a manual Ring-type adjuster for Work Positioning & length adjustment.

    Maximum length of 2.0 mtr.

    Easy to connect Steel Karabiners K-SSK112 at both the ends for attachment.

    Work Positioning Lanyard with Ring type Adjuster
  • K-WPL-242

    Made of 14mm dia polyester 3-strand Twisted Rope

    Has a convenient Rope-grab adjuster for easy length adjustment &Work Positioning.

    Maximum length of 2.0 mtr.

    Easy to connect Steel Karabiners K-SSK112 at both the free ends for attachment

    Work Positioning Lanyard with Grip Adjuster
  • K-PS-01

    Made of 44mm wide polyester webbing

    Used with work positioning lanyard

    Textile loops at both the ends for attachment.

    Pole Strap